Code Soft CS6200 Series Manuel d'utilisateur télécharger pdf (Page 30)

Note: The instruction of calibrating the aimer in vertical centering direction.

1. Scan the barcode on this page. The scanner will give three musical short beeps to indicate

entering calibration mode.

2. Press the trigger of the scanner while maintaining the distance of about 15cm between the exit

window of the scanner and this paper. After a few seconds, the scanner will give three short beeps

to indicate a successful calibration, or a long beep to indicate a failed calibration.

3. If the calibration is failed in step 2, please repeat the steps 1-2. If it is not succeed after a multiple

times of calibration, please contact your local dealer or the manufacturer for further instruction.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 84 85

Pas de commentaire

Code Soft CS6200 Series Manuel d'utilisateur Page 30